You are not logged in.

Announcement

[2017.09.08] DeployStudio build v1.7.8 (checksum, release note).
[2016.08.26] DeployStudio build v1.6.19 (release note).
[2013.02.23] DeployStudio last universal build v1.5.17 (release note).

#1 2018-03-29 10:31:55

longgegeno1
Member
Registered: 2018-01-29

Netboot Image can't show up when press option key from restart

Strange issue:
I'm trying to netboot with DS across subnet,the client can see netboot image in the system pre pane,but won't show up when press option key from restart.
And if I choose netboot image to reboot with in the system pre pane,there is always a globe spinning for 3mins then goes into local system.
Also the server bootpd log shows a lot like this,no more below.Just like the server has been telling client "I got yo,the image list is here",but the client never answered.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2018-03-29 17:08:34.378137+0800 0x80ca     Default     0x0                  2110   bootpd: NetBoot: [1,c:4d:e9:b7:d5:87] BSDP ACK[LIST] sent 10.34.19.229 pktsize 300
2018-03-29 17:08:34.378188+0800 0x80ca     Default     0x0                  2110   bootpd: BSDP INFORM [en0] 1,c:4d:e9:b7:d5:87 NetBoot001 arch=i386 sysid=Macmini6,2
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If there is something wrong with the firewall ports,plz let me konw which ports should be permit on the wall.(inbound and outbound)
Anyclue about this?
Thank you guys so much.

Offline

#2 2018-08-07 08:52:55

silenj
Member
Registered: 2011-07-12

Re: Netboot Image can't show up when press option key from restart

Whenever I had an issue with the spinning globe it was always an issue with the netboot image. If you can rebuild the netboot image from the latest Mac model you have that usually fixes the issue. Firewall wouldn't be an issue on the client side as it boots before the software. 4 months too late sorry. I hope you figured it out. Good luck

Offline

Board footer

Powered by FluxBB